Hovrs & Sorenson

Status
Not open for further replies.
diehardbiker said:
I have seen that before and yes, its under Advanced. Your modem DOES have firewall.

BTW, I do these stuff for living and know by my heart. :)

check this website, it outlines specifications for speedstream 5100, look under firewall, there is information there. SpeedStream 5100 - Siemens
Click to expand...

There is no firewall setting under advanced. Look the picture again careful. What's make you think modem is mine? I never said firewall. I SAID FIREWALL SETTING. "Firewall" and Firewall setting" are different. OFC all modem does have firewall and dont mean alway have firewall setting.


You pick wrong model. It is not Speedstream 5100.

This is Speedstream 5100 look like. OFC It's have firewall setting.
speedstream5100_c.jpg



BTW It's Speedstream 5100B which not have firewall setting. So I had to set it up for bridge mode thru PPP location to other router to make it work.
 
Nathan said:
Ouch you forget to black out the MAC Address....not to mention IP address and serial number.
Click to expand...

What make you think it's mine? I never said it's mine. I take the picture from images.google.com
 
Sure, still there is firewall, when you set to PPP you disable the firewall and transfer the firewall to the router that you have.

Please remember, the firewall is generic word, the firewall means block the ports, and there is reason for port forwarding which really means open a brick of firewall to specific private IP address..

I understand the confusion, but still almost all NAT based system has firewall.

The only DSL modem that I don't see firewall is Cisco 677 modem.


And nope, I didn't look wrong model, just that sometimes ISP mocked up the interface of a modem and that is common. Verizon have their own frirmware which makes the interface look different, just that they used different words just to confuse people like you. I was like yawning.



The Highlander said:
There is no firewall setting under advanced. Look the picture again careful. What's make you think modem is mine? I never said firewall. I SAID FIREWALL SETTING. "Firewall" and Firewall setting" are different. OFC all modem does have firewall and dont mean alway have firewall setting.


You pick wrong model. It is not Speedstream 5100.

This is Speedstream 5100 look like.
speedstream5100_c.jpg



BTW It's Speedstream 5100B which not have firewall setting. So I had to set it up for bridge mode thru PPP location to other router to make it work.
Click to expand...
 
diehardbiker said:
Sure, still there is firewall, when you set to PPP you disable the firewall and transfer the firewall to the router that you have.


Please remember, the firewall is generic word, the firewall means block the ports, and there is reason for port forwarding which really means open a brick of firewall to specific private IP address..

I understand the confusion, but still almost all NAT based system has firewall.



The only DSL modem that I don't see firewall is Cisco 677 modem.


And nope, I didn't look wrong model, just that sometimes ISP mocked up the interface of a modem and that is common. Verizon have their own frirmware which makes the interface look different, just that they used different words just to confuse people like you. I was like yawning.
Click to expand...

Nope. There is no disable the firewall under PPP for 5100B.

Interface dont matter! It's about hardware as itself.

The 5100 has four lights
5100a.jpg


The 5100b has five lights
5100b.jpg


You pick wrong model and deal with that! Don't be so stubborn. I already play around 5100 and 5100B and I can tell they are so different.

Let me mock you.

Your modem DOES have firewall. check this website, it outlines specifications for Cisco CISCO677, look under firewall, there is information there
http://www.dsldepot.com/dslmodem.asp?modem=105
 
Nope, you still don't understand,

Whenever there is NAT involved, you should be able to identified yourself easily. If the IP address shows private IP address, then there has to be firewall involved,.

That Cisco modem that I know of, pass with public IP address, that is why there isn't firewall set up.

The Highlander said:
Nope. There is no disable the firewall under PPP for 5100B.

Interface dont matter! It's about hardware as itself.

The 5100 has four lights
5100a.jpg


The 5100b has five lights
5100b.jpg


You pick wrong model and deal with that! Don't be so stubborn. I already play around 5100 and 5100B and I can tell they are so different.

Let me mock you.

Your modem DOES have firewall. check this website, it outlines specifications for Cisco CISCO677, look under firewall, there is information there
DSLDepot.com Cisco CISCO677 ADSL Modem filter, driver, & manual
Click to expand...
 
diehardbiker said:
Nope, you still don't understand,

Whenever there is NAT involved, you should be able to identified yourself easily. If the IP address shows private IP address, then there has to be firewall involved,.

That Cisco modem that I know of, pass with public IP address, that is why there isn't firewall set up.
Click to expand...

And? There still no firewall setting and no NAT setting in 5100B.


Relax, I was only mocking you about CISCO. Now you know how I feel.
What's up with that?
 
I owe SpeedStream 5100B and it does have NAT.

I disable PPP on modem and use bridge modem and use PPP on router because I was running into issue and I believe my issue was I am experiecing double NAT one on the modem and one on the router.

So I am using router to do PPP and keep only 1 NAT


.
 
TechBill said:
I owe SpeedStream 5100B and it does have NAT.

I disable PPP on modem and use bridge modem and use PPP on router because I was running into issue and I believe my issue was I am experiecing double NAT one on the modem and one on the router.

So I am using router to do PPP and keep only 1 NAT


.
Click to expand...

Thank you!

Yeah. I already explained about AllDeaf.com - View Single Post - Hovrs & Sorenson

BTW It's Speedstream 5100B which not have firewall setting. So I had to set it up for bridge mode thru PPP location to other router to make it work.
Click to expand...

I had no idea why diedhard still think 5100B have

I have seen that before and yes, its under Advanced. Your modem DOES have firewall.
Click to expand...

Do you see firewall setting in anywhere at modem in all?
 
Update:

VP installer will come to my place tmw and see what happens.
 
Moderator,

Please lock this thread

Since I already got VP last friday...finally :)

Thanks

Peace
 
Thank you DHB :)

I had a long conversation with one of my deaf friend on VP last friday night til 1am :)

Anyway, that's about it.

Peace ;)
 
Mod note:

Thread's closed per creator request. :locked:

yagazn said:
Moderator,

Please lock this thread

Since I already got VP last friday...finally :)

Thanks

Peace
Click to expand...
 
Status
Not open for further replies.
Back
Top