VP-200 Won't COnnect, Tech support no help

UPDATE for settings

UPDATE EDIT AS OF FRIDAY MAY 30 2008

LInksys WRT300N Firmware verison 1.03.3


when you login into Linksys set up page


open the browser you have to enter the URL address : 192.168.1.1 to pop up the login

when you got pop up the login : you have to enter the password: admin but user id or user name (leave blank)

after login successful,

you will see basic set up page you do not have to change it and you have to click to "Applications & Gaming" tab and you see "Single Port Forwarding" page do not need to change "Single Port Forwarding" you have to click to "DMZ"

you see "DMZ" page: when you see DMZ is Disabled, you have to change to "Enabled"
you do not have to change "Source IP Address" and selected " Any IP Address"

if you see "Destination" -- IP Address 192.168.1. you have to put 125

click Save Settings then Close Browser


you have to go VP200 videophone: that your VP connected to thorugh an ethanet to Linksys WRT300N router

you have to click "Settings" then "Network" then "Address"
you have to click Edit when you see pop up "Caution" window if you know the access code you have to enter your access code when you got success for access code to thorugh IP Address Settings

If you do not have an access code you have to call Soresnon VRS Techincal Support at (801) 287-9403 VP to obtain for your access code.

you have to remove " Obtain an IP address automatically (DHCP)

you have to modify the settings are:

IP Address: 192.168.1.125
Subnet Mask 255.255.255.0
Gateway 192.168.1.1
Primary DNS: 192.168.1.1
Secondary DNS: (blank)
Host Name VP200


The router will do for Public DNS automatically.

you are ready to call on VP or VRS.
 
Back
Top