2005 Vette
- Thread starter e
- Start date
saxxykitty78
Well-Known Member
- Joined
- Feb 27, 2003
- Messages
- 4,991
- Reaction score
- 42
uh u mean a pix of car? but I don't see any pixes? 
oh it only shows when I click on post a reply. they look okay to me.
oh it only shows when I click on post a reply. they look okay to me.
I don't like the design of that car.Slver1FineDude
New Member
- Joined
- Mar 13, 2003
- Messages
- 274
- Reaction score
- 0
Vette
G
GoldenLeaf74
Guest
nice car, but Vetta
Vetta
sablescort
New Member
- Joined
- May 1, 2003
- Messages
- 3,504
- Reaction score
- 0
It doesnt look at all a pure Corvette it is. No flip-open lights *waaaah* and it looks soo really BLAND
The new Caddy XLR that is based on the new C6 Corvette platform IMO looks much better than the pics posted above. but at 75K a pop.....its going to take forever to come up with all that moola for it.
The new Caddy XLR that is based on the new C6 Corvette platform IMO looks much better than the pics posted above. but at 75K a pop.....its going to take forever to come up with all that moola for it.
Justin Sane
New Member
- Joined
- Mar 12, 2003
- Messages
- 909
- Reaction score
- 0
I dont like it. I would rather to stick with the newest model on the market. they are fucking nice. I hate that protype vette, it reminds me of viper. I dont liike the body shape.
OK, OK. For those who dont like the pics of the c6 (top), do not worry. Here are some more pics. But remember, what really matters in the c6, is its track PERFORMANCE, which enables it to compete with other world-class super cars. Click here for the 411
http://www.autoweek.com/cat_content...verstory&loc_code=index&content_code=00790378
http://www.autoweek.com/cat_content...verstory&loc_code=index&content_code=00790378
Justin Sane
New Member
- Joined
- Mar 12, 2003
- Messages
- 909
- Reaction score
- 0
I would rather use Z06 as daily driving, not those ugly ass c6's.
if I am involved in racing, maybe c6 or boost up z06.
if I am involved in racing, maybe c6 or boost up z06.
When I metioned that looks matters, but performance matters even more...this is what I ment. Corvette always surprise us with "taking it to the next level":
I don't recall seeing all of this info (like the all aluminum hydroformed frame and 42 volt electrical system) being presented in a "done deal" type of statement before.
Of particular interest I found the info on the engine that they claim will be in the C6 Z06 variant very interesting. So for those that haven't seen it read on.
For over two years the world has been hearing little tidbits about the next generation Corvette from the automotive press and in magazines. Some facts have been right, some way out in left field. The editors here at http://www.GM-Cars.com and ww.GMInsideNews.com have taken the last 6 months to dive headfirst into the onslaught of info, to dig out what’s right, and what’s wrong. We must tell though, that even we are not 100% of the “facts” presented in the following article. We’ve taken great pains to only publish accurate information, at the same time as keeping our sources as protected as we can. After all, security on C6 is the highest of any GM project ever, with any access well behind 3 or even 4 locked and guarded doors. But, some info has gotten out, and here it is.
Style:
Remember when Motor Trend came out with its first “C6 Scoop!”? The angular lines and exposed headlights in their renderings were surprisingly correct to the current styling models that were being worked on at General Motors at the time. But then something happened. Were not quite sure what sparked it, but the whole design was scrapped. “Too bland” was used to describe the models, so C6 went back to the drawing boards. In fact, the 2003 Viper had a little do to with it also. The MT drawings suggested very large and angular side vents on the C6, almost exactly like the ones on the 03 Viper. Now, C6 had them drawn first, but Viper was going to make it to production first. GM stylists didn’t want to be viewed as “copycats”.
Another feature shown was exposed headlights. What, exposed headlights on a Corvette? How could this be? Well, this part that MT got right, still applies. C6 is due to be the first Corvette in over 3 generations to have non-popup headlamps. But, don’t get to down yet. These new lamps will be either HID or Xeon lamps, with much greater visibility than ever before. Look for a little late C1 styling influence to creep its way into the reflector design.
In other areas, look for a more muscular design to grace the exterior. We’ve heard it described as an “Exaggerated C5”. Look for shorter overhangs front and rear that contribute to an overall shorter length, while the wheel base grows approximately 3-4 inches to accommodate the new 5-speed automatic (more on that later).
The side vents have also been described to us as C5R’ish looking, wider and larger than on the current C5. The rear will get a smaller treatment, and the familiar duel tail lamps will remain, but somewhat combined under one larger covering or indentation for each side. Look for larger bulges over the front wheels, as well as more pronounced C3 like humps over the rear wheels. We’ve also heard that C3 style door handles could be a possibility (which is backed up by the placement of the door handles on the XPR).
Chassis and Power:
So, the C6 is just a C5 re-skin, right? Wrong. Numerous chassis improvements are on the way. The most significant is the move to an all aluminum frame to reduce weight and improve structural strength. Aluminum? Isn’t the XLR’s steel frame based off the C6 frame? Well, yes it is based off it, but no, it’s not steel. GM’s keeping hush-hush about the fact that the XLR’s frame is really aluminum until close to production. This way they can throw off the public about any links to the C6. Another improvement is the refinement of the hydro-forming process. Hydro-forming is the process in which steel is blown up, almost like a balloon, with water, to expand into a preset mold. This stresses the metal very little, for a very strong frame. The only problem up until now is that hydro-forming creates a uniform thickness across the whole piece of metal. GM has discovered a new way of hydro-forming for the C6 that will allow metal thickness to be controlled over the whole length of the piece. This way, extra metal (and weight) is removed.
Speaking of weight, the standard C6 is expected to weight anywhere from 300-500lbs lighter than the current C5, and that goes for the new Z06 variant. Less weight is almost better than more horsepower, as you’re not losing any fuel efficiency with better performance. Chassis length has been increased mainly to accommodate the 5th gear in the new 5-speed automatic transmission. A new generation 42volt electrical system allows for smaller wiring harnesses, reduced weight, and more power hungry devices such as magnetic shocks, and other advanced technologies.
Now comes for the engines. This is the only part that the automotive magazines have totally gone wrong on. Here are two things that the C6 will not have for an engine: One with displacement on demand, and one with two cams in the block. Rumors about these two features have been plastered along side every C6 story we’ve read, but they are simply not true. But truth can be stranger than fiction as you will soon read. The base engine, dubbed LS2, will be based off the current LS6. It will retain its 400+hp status and OHV layout. Expect improved fuel economy, and performance (mostly due to the reduced weight). The strange part comes strait out of aviation history books. The high performance version of the C6 (possibly still named Z06) will be powered by a new generation of cam-less engine. That’s right, electronically actuated valves. Not only will this give the HP version of the C6 infinite valve timing, but close-to, if not north-of 500hp. Cam-less engines have been used for years in circular piston aircraft engines where placement of a cam is impossible. Since publication-we’ve gotten wind that this cam-less engine may not be available at the start of production-despite the fact that Dave Hill has promised all 3 versions at the start. Snake tamer is one word we look forward to using with the C6. This little bit of engine information has already gotten close to 14 people fired from GM, and is one of the C6’s most closely guarded secrets.
Interior:
Interior enrichment is on the top of the list for C6, with the Audi TT set as the basis to improve on. Expect little bits of aluminum, as well as more expensive looking pieces to be used. Rumor has the radio and HVAC controls being controlled by LCD screen, although we’re not sure if these reports are accurate. Another cool bit we’ve heard is being toyed around with, is the possibility for a completely digital instrument cluster, with the option of switching between digital and analog gauges. We think that’s being hopeful though, so don’t get disappointed if analog gauges are what finally gets the stamp.
Testing:
Believe it or not, there are “C6’s” out testing right now. Although, any that leave the testing grounds are either in C5 or covered XLR drab. C6 alphas are rumored to be just getting the new bodies inside the proving grounds in Arizona and Michigan. We’ve also had confirmation that testing has been done at one private track in the southeast United States during late winter. Reports state that the C6 mule out lapped a Z06 by a large margin. Also, we expect, but have no confirmation that C6 mules are to be tested in northern Canada and Australia starting this fall. And if your feeing brave, and want to try to take a look for yourself, C6’s have been reportedly spotted running down the large back strait-away at GM’s Milford proving grounds just before dawn in the recent weeks.
I don't recall seeing all of this info (like the all aluminum hydroformed frame and 42 volt electrical system) being presented in a "done deal" type of statement before.
Of particular interest I found the info on the engine that they claim will be in the C6 Z06 variant very interesting. So for those that haven't seen it read on.
For over two years the world has been hearing little tidbits about the next generation Corvette from the automotive press and in magazines. Some facts have been right, some way out in left field. The editors here at http://www.GM-Cars.com and ww.GMInsideNews.com have taken the last 6 months to dive headfirst into the onslaught of info, to dig out what’s right, and what’s wrong. We must tell though, that even we are not 100% of the “facts” presented in the following article. We’ve taken great pains to only publish accurate information, at the same time as keeping our sources as protected as we can. After all, security on C6 is the highest of any GM project ever, with any access well behind 3 or even 4 locked and guarded doors. But, some info has gotten out, and here it is.
Style:
Remember when Motor Trend came out with its first “C6 Scoop!”? The angular lines and exposed headlights in their renderings were surprisingly correct to the current styling models that were being worked on at General Motors at the time. But then something happened. Were not quite sure what sparked it, but the whole design was scrapped. “Too bland” was used to describe the models, so C6 went back to the drawing boards. In fact, the 2003 Viper had a little do to with it also. The MT drawings suggested very large and angular side vents on the C6, almost exactly like the ones on the 03 Viper. Now, C6 had them drawn first, but Viper was going to make it to production first. GM stylists didn’t want to be viewed as “copycats”.
Another feature shown was exposed headlights. What, exposed headlights on a Corvette? How could this be? Well, this part that MT got right, still applies. C6 is due to be the first Corvette in over 3 generations to have non-popup headlamps. But, don’t get to down yet. These new lamps will be either HID or Xeon lamps, with much greater visibility than ever before. Look for a little late C1 styling influence to creep its way into the reflector design.
In other areas, look for a more muscular design to grace the exterior. We’ve heard it described as an “Exaggerated C5”. Look for shorter overhangs front and rear that contribute to an overall shorter length, while the wheel base grows approximately 3-4 inches to accommodate the new 5-speed automatic (more on that later).
The side vents have also been described to us as C5R’ish looking, wider and larger than on the current C5. The rear will get a smaller treatment, and the familiar duel tail lamps will remain, but somewhat combined under one larger covering or indentation for each side. Look for larger bulges over the front wheels, as well as more pronounced C3 like humps over the rear wheels. We’ve also heard that C3 style door handles could be a possibility (which is backed up by the placement of the door handles on the XPR).
Chassis and Power:
So, the C6 is just a C5 re-skin, right? Wrong. Numerous chassis improvements are on the way. The most significant is the move to an all aluminum frame to reduce weight and improve structural strength. Aluminum? Isn’t the XLR’s steel frame based off the C6 frame? Well, yes it is based off it, but no, it’s not steel. GM’s keeping hush-hush about the fact that the XLR’s frame is really aluminum until close to production. This way they can throw off the public about any links to the C6. Another improvement is the refinement of the hydro-forming process. Hydro-forming is the process in which steel is blown up, almost like a balloon, with water, to expand into a preset mold. This stresses the metal very little, for a very strong frame. The only problem up until now is that hydro-forming creates a uniform thickness across the whole piece of metal. GM has discovered a new way of hydro-forming for the C6 that will allow metal thickness to be controlled over the whole length of the piece. This way, extra metal (and weight) is removed.
Speaking of weight, the standard C6 is expected to weight anywhere from 300-500lbs lighter than the current C5, and that goes for the new Z06 variant. Less weight is almost better than more horsepower, as you’re not losing any fuel efficiency with better performance. Chassis length has been increased mainly to accommodate the 5th gear in the new 5-speed automatic transmission. A new generation 42volt electrical system allows for smaller wiring harnesses, reduced weight, and more power hungry devices such as magnetic shocks, and other advanced technologies.
Now comes for the engines. This is the only part that the automotive magazines have totally gone wrong on. Here are two things that the C6 will not have for an engine: One with displacement on demand, and one with two cams in the block. Rumors about these two features have been plastered along side every C6 story we’ve read, but they are simply not true. But truth can be stranger than fiction as you will soon read. The base engine, dubbed LS2, will be based off the current LS6. It will retain its 400+hp status and OHV layout. Expect improved fuel economy, and performance (mostly due to the reduced weight). The strange part comes strait out of aviation history books. The high performance version of the C6 (possibly still named Z06) will be powered by a new generation of cam-less engine. That’s right, electronically actuated valves. Not only will this give the HP version of the C6 infinite valve timing, but close-to, if not north-of 500hp. Cam-less engines have been used for years in circular piston aircraft engines where placement of a cam is impossible. Since publication-we’ve gotten wind that this cam-less engine may not be available at the start of production-despite the fact that Dave Hill has promised all 3 versions at the start. Snake tamer is one word we look forward to using with the C6. This little bit of engine information has already gotten close to 14 people fired from GM, and is one of the C6’s most closely guarded secrets.
Interior:
Interior enrichment is on the top of the list for C6, with the Audi TT set as the basis to improve on. Expect little bits of aluminum, as well as more expensive looking pieces to be used. Rumor has the radio and HVAC controls being controlled by LCD screen, although we’re not sure if these reports are accurate. Another cool bit we’ve heard is being toyed around with, is the possibility for a completely digital instrument cluster, with the option of switching between digital and analog gauges. We think that’s being hopeful though, so don’t get disappointed if analog gauges are what finally gets the stamp.
Testing:
Believe it or not, there are “C6’s” out testing right now. Although, any that leave the testing grounds are either in C5 or covered XLR drab. C6 alphas are rumored to be just getting the new bodies inside the proving grounds in Arizona and Michigan. We’ve also had confirmation that testing has been done at one private track in the southeast United States during late winter. Reports state that the C6 mule out lapped a Z06 by a large margin. Also, we expect, but have no confirmation that C6 mules are to be tested in northern Canada and Australia starting this fall. And if your feeing brave, and want to try to take a look for yourself, C6’s have been reportedly spotted running down the large back strait-away at GM’s Milford proving grounds just before dawn in the recent weeks.
Italian Paco
New Member
- Joined
- May 3, 2003
- Messages
- 43
- Reaction score
- 0
I have 2000 Nissan Maxima SE. I got it in two years ago from my dad's work at Lexus of Massapequa. My car is good so far.. I like it but I love Lexus GS430 better hehe i cant afford it but someday I will get Lexus GS430 !!! hehe *wink*
W
Wheel-Man
Guest
Originally posted by XSilverX-76
me second that
webexplorer
Active Member
- Joined
- Jun 12, 2003
- Messages
- 5,517
- Reaction score
- 0
My father is still looking to buy an used corvette between 1991 - 1999 for about $15,000. Do you know anyone wants to sell it?
sablescort
New Member
- Joined
- May 1, 2003
- Messages
- 3,504
- Reaction score
- 0
webexplorer said:
a C4 (1991-1996) should go for $15K or less but a C5 (1997-1999) for $15,000.....that's a toughie to find one in good shape for that much moola, but let me send you over to http://www.autotraderonline.com and you can search for a Corvette that your father can pick up for the price he wants to pay for......