help...vp

justlook

justlook

New Member
Joined
Oct 16, 2004
Messages
99
Reaction score
0
i got di 604 and have i2eye vp... vp notice the router--when i call relay it show black xcreen..
internet works fine on computer.
network address from vp
enable dhcp
ip address:192.168.102
subnet mask:255.255.255.0
gateway:192.168.0.1
it notice public ip...
primary dns 198.168.0.1

sorry i cant upload the screenprint for dlink configure..too large size..
 
justlook said:
i got di 604 and have i2eye vp... vp notice the router--when i call relay it show black xcreen..
internet works fine on computer.
network address from vp
enable dhcp
ip address:192.168.102
subnet mask:255.255.255.0
gateway:192.168.0.1
it notice public ip...
primary dns 198.168.0.1

sorry i cant upload the screenprint for dlink configure..too large size..
Click to expand...

You got it wrong IP address. Can NOT have Public IP as NAT address and it missed one set of number. The pubic IP address HAVE to be assigned by your ISP not your router.
 
justlook said:
oh? how to change that?
Click to expand...
You could set your VP manually assigned IP addy to 192.168.0.125 then go down to router, Enable DMZ and make sure put 125 in there. Not Just any number
 
after apply...reboot computer and vp. not router and modem.. nothing change...
how to downsize for screenprint? to show the dlink configure
 
well... i ll be back later tonight if anyone is up late... to figure out on this...
 
justlook said:
i got di 604 and have i2eye vp... vp notice the router--when i call relay it show black xcreen..
internet works fine on computer.
network address from vp
enable dhcp
ip address:192.168.102
subnet mask:255.255.255.0
gateway:192.168.0.1
it notice public ip...
primary dns 198.168.0.1

sorry i cant upload the screenprint for dlink configure..too large size..
Click to expand...

The two numbers in bold are where I think problem is. As already mentioned the first should be 192.168.0.125 the second number for DNS I do not know what it should be. However, I'm pretty sure that it is not supposed to be 192.168.x.xxx number.
 
well i m back to check the update reply...
the vp (i2eye) that i got from hamilton anyway the version is
application : 3.0.0.155
boot loader:1.0.4.2
app loader:1.0.300.101
does it made any different?
since i brough new di-604 the f/w version is 3.51 and h/w version is e3
is it too new for vp?
should i turn on vp before any computer after router and modem is on?
 
diehardbiker65 said:
You could set your VP manually assigned IP addy to 192.168.0.125 then go down to router, Enable DMZ and make sure put 125 in there. Not Just any number
Click to expand...

any nmber will do fine as long as they are both the same
disable dhcp
 
dkf747 said:
The two numbers in bold are where I think problem is. As already mentioned the first should be 192.168.0.125 the second number for DNS I do not know what it should be. However, I'm pretty sure that it is not supposed to be 192.168.x.xxx number.
Click to expand...

one dns 192.168.0.1 is fine no need for second dns
 
qwerty123 said:
any nmber will do fine as long as they are both the same
disable dhcp
Click to expand...

you mean vp and dlink configure both disable? im on dsl...
 
HI..
MY SUGGESTION:
CALL VP SORENSON TECH ON VP, ITS THEIR JOBS, THEY SHOULD HELP YOU WITH THAT.
OR
IF YOU HAVE I2EYE DLINK VP: CALL THEIR TECH, THEY WOULD MORE HAPPY TO HELP YOU. OR SEND THE INSTALLER TO SEE YOU AND HELP YOU.

ITS THEIR JOBS TO HELP US...SMILE :type: :ty:
 
Back
Top