Hovrs & Sorenson - Page 2

diehardbiker · 07-03-2009, 07:17 PM

does not matter which one, still 99% of DSL modem has built in router while about 80% of cable modem does not have router built in.

Quote:

Originally Posted by yagazn

Well, is that wireless router? I ordered the standard DSL modem.

yagazn · 07-03-2009, 07:23 PM

Oh, I see. Okay, Thanks DHB

The Highlander · 07-03-2009, 07:48 PM

Quote:

Originally Posted by diehardbiker

does not matter which one, still 99% of DSL modem has built in router while about 80% of cable modem does not have router built in.

Well. Some of DSL modem with built-in router still don't have firewall setting.

diehardbiker · 07-03-2009, 08:01 PM

That is very rare, I havent seen one without firewall buillt in so far,
some of them the firewall actually buried deep, you have to look harder, this includes Motorola DSL modem, and embarq 660 series.

Westell all models have firewall/router Even with FiOS (New Westell modem support FiOS, and I think it is 9100 series)
2wire all models have firewall/router
Motorola 2210 and 3327 has built in firewwall
Actiontec modem all models have firewall/router Even with FiOS (Mi424)

AT&T offers either 2wire or Motorola modems

Quote:

Originally Posted by The Highlander

Well. Some of DSL modem with built-in router still don't have firewall setting.

SouthFella · 07-04-2009, 09:45 AM

Wireless routers and VPs dont get along...

The Highlander · 07-04-2009, 09:44 PM

Quote:

Originally Posted by diehardbiker

That is very rare, I havent seen one without firewall buillt in so far,
some of them the firewall actually buried deep, you have to look harder, this includes Motorola DSL modem, and embarq 660 series.

Westell all models have firewall/router Even with FiOS (New Westell modem support FiOS, and I think it is 9100 series)
2wire all models have firewall/router
Motorola 2210 and 3327 has built in firewwall
Actiontec modem all models have firewall/router Even with FiOS (Mi424)

AT&T offers either 2wire or Motorola modems

Then it rare for you. It's all depend on ISP and area. I see there are plenty of SBC DSL modem without firewall setting.

Here a picture exactly like that. Good luck with this and let me know when you find the firewall setting.

The Highlander · 07-04-2009, 09:48 PM

Quote:

Originally Posted by SouthFella

Wireless routers and VPs dont get along...

Why?

Wireless N router are work great for VP with wireless N bridge.

Nathan · 07-04-2009, 10:00 PM

Ouch you forget to black out the MAC Address....not to mention IP address and serial number.

diehardbiker · 07-04-2009, 10:52 PM

I have seen that before and yes, its under Advanced. Your modem DOES have firewall.

BTW, I do these stuff for living and know by my heart.

check this website, it outlines specifications for speedstream 5100, look under firewall, there is information there. http://bc.whirlpool.net.au/bc/hardwa...w&model_id=394

Quote:

Originally Posted by The Highlander

Then it rare for you. It's all depend on ISP and area. I see there are plenty of SBC DSL modem without firewall setting.

Here a picture exactly like that. Good luck with this and let me know when you find the firewall setting.

diehardbiker · 07-04-2009, 11:53 PM

Yea, I agreed.

Quote:

Originally Posted by Nathan

Ouch you forget to black out the MAC Address....not to mention IP address and serial number.

The Highlander · 07-05-2009, 12:08 AM

Quote:

Originally Posted by diehardbiker

I have seen that before and yes, its under Advanced. Your modem DOES have firewall.

BTW, I do these stuff for living and know by my heart.

check this website, it outlines specifications for speedstream 5100, look under firewall, there is information there. SpeedStream 5100 - Siemens

There is no firewall setting under advanced. Look the picture again careful. What's make you think modem is mine? I never said firewall. I SAID FIREWALL SETTING. "Firewall" and Firewall setting" are different. OFC all modem does have firewall and dont mean alway have firewall setting.

You pick wrong model. It is not Speedstream 5100.

This is Speedstream 5100 look like. OFC It's have firewall setting.

BTW It's Speedstream 5100B which not have firewall setting. So I had to set it up for bridge mode thru PPP location to other router to make it work.

The Highlander · 07-05-2009, 12:09 AM

Quote:

Originally Posted by Nathan

Ouch you forget to black out the MAC Address....not to mention IP address and serial number.

What make you think it's mine? I never said it's mine. I take the picture from images.google.com

diehardbiker · 07-05-2009, 12:32 AM

Sure, still there is firewall, when you set to PPP you disable the firewall and transfer the firewall to the router that you have.

Please remember, the firewall is generic word, the firewall means block the ports, and there is reason for port forwarding which really means open a brick of firewall to specific private IP address..

I understand the confusion, but still almost all NAT based system has firewall.

The only DSL modem that I don't see firewall is Cisco 677 modem.

And nope, I didn't look wrong model, just that sometimes ISP mocked up the interface of a modem and that is common. Verizon have their own frirmware which makes the interface look different, just that they used different words just to confuse people like you. I was like yawning.

Quote:

Originally Posted by The Highlander

There is no firewall setting under advanced. Look the picture again careful. What's make you think modem is mine? I never said firewall. I SAID FIREWALL SETTING. "Firewall" and Firewall setting" are different. OFC all modem does have firewall and dont mean alway have firewall setting.

You pick wrong model. It is not Speedstream 5100.

This is Speedstream 5100 look like.

BTW It's Speedstream 5100B which not have firewall setting. So I had to set it up for bridge mode thru PPP location to other router to make it work.

The Highlander · 07-05-2009, 12:46 AM

Quote:

Originally Posted by diehardbiker

Sure, still there is firewall, when you set to PPP you disable the firewall and transfer the firewall to the router that you have.

Please remember, the firewall is generic word, the firewall means block the ports, and there is reason for port forwarding which really means open a brick of firewall to specific private IP address..

I understand the confusion, but still almost all NAT based system has firewall.

The only DSL modem that I don't see firewall is Cisco 677 modem.

And nope, I didn't look wrong model, just that sometimes ISP mocked up the interface of a modem and that is common. Verizon have their own frirmware which makes the interface look different, just that they used different words just to confuse people like you. I was like yawning.

Nope. There is no disable the firewall under PPP for 5100B.

Interface dont matter! It's about hardware as itself.

The 5100 has four lights

The 5100b has five lights

You pick wrong model and deal with that! Don't be so stubborn. I already play around 5100 and 5100B and I can tell they are so different.

Let me mock you.

Your modem DOES have firewall. check this website, it outlines specifications for Cisco CISCO677, look under firewall, there is information there
http://www.dsldepot.com/dslmodem.asp?modem=105

The Highlander · 07-05-2009, 12:55 AM

Quote:

Originally Posted by diehardbiker

Sure, still there is firewall, when you set to PPP you disable the firewall and transfer the firewall to the router that you have.

prove it!

diehardbiker · 07-05-2009, 12:56 AM

Nope, you still don't understand,

Whenever there is NAT involved, you should be able to identified yourself easily. If the IP address shows private IP address, then there has to be firewall involved,.

That Cisco modem that I know of, pass with public IP address, that is why there isn't firewall set up.

Quote:

Originally Posted by The Highlander

Nope. There is no disable the firewall under PPP for 5100B.

Interface dont matter! It's about hardware as itself.

The 5100 has four lights

The 5100b has five lights

You pick wrong model and deal with that! Don't be so stubborn. I already play around 5100 and 5100B and I can tell they are so different.

Let me mock you.

Your modem DOES have firewall. check this website, it outlines specifications for Cisco CISCO677, look under firewall, there is information there
DSLDepot.com Cisco CISCO677 ADSL Modem filter, driver, & manual

The Highlander · 07-05-2009, 01:07 AM

Quote:

Originally Posted by diehardbiker

Nope, you still don't understand,

Whenever there is NAT involved, you should be able to identified yourself easily. If the IP address shows private IP address, then there has to be firewall involved,.

That Cisco modem that I know of, pass with public IP address, that is why there isn't firewall set up.

And? There still no firewall setting and no NAT setting in 5100B.

Relax, I was only mocking you about CISCO. Now you know how I feel.
What's up with that?

The Highlander · 07-05-2009, 01:12 AM

Quote:

Originally Posted by The Highlander

prove it!

No answer? That's what I thought so.

TechBill · 07-05-2009, 01:55 AM

I owe SpeedStream 5100B and it does have NAT.

I disable PPP on modem and use bridge modem and use PPP on router because I was running into issue and I believe my issue was I am experiecing double NAT one on the modem and one on the router.

So I am using router to do PPP and keep only 1 NAT

.

The Highlander · 07-05-2009, 02:54 AM

Quote:

Originally Posted by TechBill

I owe SpeedStream 5100B and it does have NAT.

I disable PPP on modem and use bridge modem and use PPP on router because I was running into issue and I believe my issue was I am experiecing double NAT one on the modem and one on the router.

So I am using router to do PPP and keep only 1 NAT

.

Thank you!

Yeah. I already explained about AllDeaf.com - View Single Post - Hovrs & Sorenson

Quote:

BTW It's Speedstream 5100B which not have firewall setting. So I had to set it up for bridge mode thru PPP location to other router to make it work.

I had no idea why diedhard still think 5100B have

Quote:

I have seen that before and yes, its under Advanced. Your modem DOES have firewall.

Do you see firewall setting in anywhere at modem in all?

diehardbiker · 07-05-2009, 07:51 AM

I had to go bed anyway, too tired and have to get up in just 5 hours so I can go work urgh!

Quote:

Originally Posted by The Highlander

No answer? That's what I thought so.

yagazn · 07-10-2009, 02:09 AM

VP installer will come to my place tmw and see what happens.

yagazn · 07-12-2009, 05:38 PM

Moderator,

Please lock this thread

Since I already got VP last friday...finally

Thanks

Peace

diehardbiker · 07-12-2009, 06:08 PM

Congratulations! Hope you enjoy SorensonVRS

Quote:

Originally Posted by yagazn

Moderator,

Please lock this thread

Since I already got VP last friday...finally

Thanks

Peace

yagazn · 07-12-2009, 08:40 PM

Thank you DHB

I had a long conversation with one of my deaf friend on VP last friday night til 1am

Anyway, that's about it.

Peace

JClarke · 07-12-2009, 09:16 PM

YOu enjoying the new toy?

yagazn · 07-13-2009, 01:53 AM

Uh-huh, I enjoyed my new toy.

Peace

***Calvin*** · 07-13-2009, 02:34 AM

Mod note:

Thread's closed per creator request.

Quote:

Originally Posted by yagazn

Moderator,

Please lock this thread

Since I already got VP last friday...finally

Thanks

Peace

07-04-2009, 09:45 AM	#35 (permalink)
SouthFella Registered User Join Date: Jun 2004 Location: Colorado Posts: 360	Wireless routers and VPs dont get along... __________________ Implanted 04/23/2008... MedEl ( with nifty Remote Control } Right Ear, Phonak Savia Left Ear.

07-04-2009, 10:00 PM	#38 (permalink)
Nathan ban...kai... Join Date: Apr 2006 Location: Puerto Rico, Isle of Enchantment Posts: 2,620 Blog Entries: 6	Ouch you forget to black out the MAC Address....not to mention IP address and serial number. __________________ Nathan's Blog / Nathan's WordPress iPhone 3GS 16GB 3.1.1 Jailbroken "Do you wallow in self-pity, or do you learn to use the gifts God gave you and command fear and respect, and defend against those who would do us harm?"

07-10-2009, 02:09 AM	#52 (permalink)
yagazn taking a break from AD Join Date: May 2008 Location: Yag in Neverland Posts: 2,493	Update: VP installer will come to my place tmw and see what happens. __________________ Mummy: I'm watching you because you spend too time on AD...Nah, It's a joke

07-12-2009, 05:38 PM	#53 (permalink)
yagazn taking a break from AD Join Date: May 2008 Location: Yag in Neverland Posts: 2,493	Moderator, Please lock this thread Since I already got VP last friday...finally Thanks Peace __________________ Mummy: I'm watching you because you spend too time on AD...Nah, It's a joke

07-12-2009, 08:40 PM	#55 (permalink)
yagazn taking a break from AD Join Date: May 2008 Location: Yag in Neverland Posts: 2,493	Thank you DHB I had a long conversation with one of my deaf friend on VP last friday night til 1am Anyway, that's about it. Peace __________________ Mummy: I'm watching you because you spend too time on AD...Nah, It's a joke

Today
Deafness	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on AllDeaf.com

07-03-2009, 07:23 PM	#32 (permalink)
yagazn taking a break from AD Join Date: May 2008 Location: Yag in Neverland Posts: 2,493	Oh, I see. Okay, Thanks DHB

07-05-2009, 01:55 AM	#49 (permalink)
TechBill Registered User Join Date: Nov 2006 Posts: 832	I owe SpeedStream 5100B and it does have NAT. I disable PPP on modem and use bridge modem and use PPP on router because I was running into issue and I believe my issue was I am experiecing double NAT one on the modem and one on the router. So I am using router to do PPP and keep only 1 NAT .

07-12-2009, 09:16 PM	#56 (permalink)
JClarke Good times, good times. Join Date: Nov 2006 Location: Packing bags for U.S.A Posts: 19,562 Blog Entries: 5	YOu enjoying the new toy? __________________ If you want to meet me in U.S, click here!

07-13-2009, 01:53 AM	#57 (permalink)
yagazn taking a break from AD Join Date: May 2008 Location: Yag in Neverland Posts: 2,493	Uh-huh, I enjoyed my new toy. Peace __________________ Mummy: I'm watching you because you spend too time on AD...Nah, It's a joke

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode