Quote:
Originally Posted by schweisshund
nope its not a scam - the person who invented this holds the original patent but was murdered in 1998. he refused to sell it to oil companies.
another thing - putting hydrogen inside a metallic canister would be dangerous, it has to be in a fiber composite cannister that would rip if it were ever struck instead of explode and send shrapnel everywhere.
the mechanics are currently discussing "fuel delivery" options.
|
1 ft long, 4 in diameter w/ caps PCV pipe as a Hydrogen Reaction Chamber sitting upright position. But be careful with pressure. It must be between 20psi to 60psi with relief valve preset to 75psi maximum. Also use flameback preventer used on welding equiptment to prevent flame going back into chamber and also use 1 way valve too for safety measure. Hose connect to Fuel Injector or inlet of carbeuator.
PCV pipes are safe to use cuz it's rated up to 300 psi. It'll cracks open or pops off caps if overpressurized. It would be filled 1/2 water with stainless steel plates and 1/2 of Hydrogen gas produced by eletrocsys. No need tanks. Can have either more stainless steel plates or another reaction chambers to produce plenty hydrogen instantly.
Catty